Moulding Material Specifications

Polyurethane

First Class Building Products, Inc. products are made with high density polyurethane with an overall density similar to white pine at 13 to 17 pounds per cubic foot. The First Class Building Products, Inc. process provides a greater skin density than core density for increased durability.

All products are manufactured with a white or beige colour coating. Further, these products receive a primer coat finish before they are shipped to customers. the combination of the integral shell-like skin, the barrier coat, and the primer top coat provide an excellent substrate for durable finishes.

Ultra violet rays do not affect properly coated products.

The compressive strength of polyurethane products falls within the 300-400 P.S.I. Range. (The parts are not intended for structural use.)

The tensile strength of polyurethane products falls within the 350-400 P.S.I. range. (The parts are not intended for structural use.)

The degree of flexibility of any given polyurethane product is determined by the size and shape of its cross section. However, due to the inherent flex characteristics of polyurethane products, they will follow some curvatures and uneven surfaces.

First Class polyurethane has a closed cell structure which provides protection from most solvents and renders it almost completely hydrophophic. It will not rot!

All First Class polyurethane products resist the growth of mildew and fungus and further provide no nutritional value for other organisms such as small rodents.

INSTALLATION

First Class polyurethane products are handled in the same manner as wood millwork.
First Class adhesives refer to model PL Premium.

Fasteners refer to nails, screws, bolts etc.

First Class adhesives and fasteners must be used for installing all First Class products on concrete, metal, vinyl or wood. Adhesive must be used on all joints to ensure the beauty of your installation for years to come.

FINISHING

First Class products are supplied with a white or beige primer base coat, ready for finishing top coat. A good quality exterior or latex or oil base paint may be used on rigid First Class product. On First Class flexible product use HQ Alkyd Enamel such as Benjamin Moore M24. The surface must be clean, dry, and free from all greases or waxes before all finish work is begun.

WARRANTY

First Class Building Products, Inc. warrants its product upon the following conditions against defects in materials and workmanship for a period of one year from date of purchase when used and installed under recommended conditions.
Purchaser and installer must inspect each piece prior to installation Both parties waive all defects which could have been discovered by reasonable inspection prior to installation.

Warranty will automatically be void if First Class adhesives (PL Premium) are not used as per section on Installation.

In the event claim is made under this warrant, First Class has the right to inspect the part and determine at his/her discretion, that the parts supplied are defective. First Class will repair, or if need be, replace said defective parts if returned freight prepaid to First Class place of manufacturing. If First Class determines the parts cannot be repaired or replaced, First Class will refund to the distributor the amount paid to First Class for the said defective parts.

First Class shall have no liability to any person, firm or corporation whatsoever for incidental or consequential damages such as but not limited to, labour, finishing, parts damaged by freight carriers, freight charges, installation, lost profits, and lost sales or the like.

No purchaser may take any deduction or credit against any amount owed to First Class, Inc. or make any charge back without the expressed written consent of First Class.